Cutter and corner cutter The cutter is suitable for cutting paper, cardboard, foils and thin foils soft plastics. The self sharpening cutters will give long life and efficient service as far as the maximal capacity under clamp of (1.5 mm ) is not overstepped or unsuitable material is cut.
Loading and storage tables For X – ray films storage; Stove enamelled steel structure; Wood top coated in black; Hatches in the balance with the forced closure and sealing light
Daters
Passe – Cassettes Stove enamelled steel structure; Shelves rubber coated; X- ray frontal protection with Pb mm 2; Alternated and forced closure by safety device.
Photomarker for darkroom In stove enamelled steel; Identification space mm 85 x 25; Provided with electronic timer.
Fans for darkroom Provided with cloak no light and remote control with flow invertitor . Installation hole mm 260 diam.
Movable wall lamp Size cm 16 x 21. Made of anti-acid plastic material. Movable support with lamp 15 W 220 V. Suitable for interchangeable filter cm 16 x 21.
Sodium ceiling lamp Plate steel enamelled lamp. Red safety screen cm 25 x 35 for blue light films. Sodium steam lamp NA 35 W
X-ray film viewer wall series standards Stove enamelled steel structure thickness 0,8 mm; Fire epoxy painting colour peel RAL 9010, upon structure cleaning treatment; Smelted opaline acrylic screen thickness 3 mm inserted into the structure; Neon tubes of 6.000°Kelvin (other type of tubes available on request); Upper and/or central pressing rolls film holding system; Bipolar switches
X-ray film viewer standard series horizontal Stove enamelled steel structure thickness 0,8 mm; Fire epoxy painting colour peel RAL 9010, upon structure cleaning treatment; Smelted opaline acrylic screen thickness 3 mm inserted into the structure; Neon tubes of 6.000°Kelvin (other type of tubes available on request); Upper and/or central pressing rolls film holding system; Bipolar switches
X-ray film viewer standard series Stove enamelled steel structure thickness 0,8 mm; Fire epoxy painting colour peel RAL 9010, upon structure cleaning treatment; Smelted opaline acrylic screen thickness 3 mm inserted into the structure; Neon tubes of 6.000°Kelvin (other type of tubes available on request); Upper and/or central pressing rolls film holding system; Bipolar switches
X-ray film viewer high frequency series Stove enamelled steel structure thickness 0,8 mm; Fire epoxy painting colour peel RAL 9010; Smelted opaline acrylic screen thickness 3 mm inserted into the structure; Neon tubes of 6.000°Kelvin (other type of tubes available on request); Speed switching by electronic reactors of 40.000 Hz which avoid lamps flutter; Special
X-ray film viewer high light intensity series Stove enamelled steel structure thickness 0,8 mm. Fire epoxy painting colour peel RAL 9010, upon structure cleaning treatment Smelted opaline acrylic screen thickness 3 mm inserted into the structure Neon tubes of 6.000°Kelvin (other type of tubes available on request) Speed bipolar switches on the front Upper and/or
X-ray film viewers with shutters Stove enamelled steel structure, thickness 0,8 mm; Fire epoxy painting color peel RAL 9010; Smelted opaline plexiglass screen; Neon tubes of 6.000°Kelvin with high frequency reactors feeding; Upper and/or central film holder; Speed bipolar switches on the front comp0lete with dimmer which allows a very good light regulation from 100%
X-ray film viewer wall recessed series Homogeneous lighting by n°3 fluorescent tubes with colour temperature 6000° K. Pressing rolls film-holding system Stove enamelled steel structure Outside polished steel frame White monochromatic diffuser Equipped with terminal board for electrical connection. Predisposed for explosion-proof installation. Which this declaration refers, conforms to Directive 93/42/CEE – Medical Devices –
